Health and Social Care Essay

Ageing process is a must of human growth and developments their various attempts have there have been made to explain the process of ageing and identify the key influential factors. Health and social care practitioners of somewhat with all the people I need to understand how individuals adapt to life during old-age. What is disengagement theory Planning and Henry would process the disengage is meant theory as a way of explaining different behaviour and development in old age. They would suggest that when people reach their 60s they begin to disengage from active role in society for a variety of reasons: †¢ Ill health †¢ retirement from work †¢ loss of friendship and social support through illness and death of partners friends and relatives †¢ Lack of access to travel facilities †¢ inability to use communication technology They argue that disengagement in old age happens voluntarily and with the approval of the younger generation because it frees up work for them. They suggest it is normal and appropriate that has benefits of society and the older people. The disengagement theory has been criticised for the acceptance of the social exclusion for older people, They say that you could be argued that age is then restrict the ability of some older people, They think that they are not active citizens and they withdrawal from active social roles and it’s not a choice. Their original research has been criticises well is based on small sample of American adults who were taken to be typical of or older people everywhere they also just suggest that many older people remain engaged with their family and friends and then no more socially active in these types of groups once they have retired from work. To Mary worked until an old age and she would’ve been acted until then going to work playing with h er children when she grows older she may Now still be active with walking to the shops or going to different educational classes to stimulate her brain. Activity theory This processes that different disengagement theory, the more active the older person is the more they will be satisfied they will feel. The activity theorist such as fennell, phillipson and evens would argue that older people often resist disengagement from different important aspects of their life by maintaining a middle age lifestyle. Many older people will take part in social and education activities as a way of staying mentally active and physically healthy. The activity theory has been critiques on the grounds that it could be a way of explaining the response to ageing of some people; it fails to take the diversity of the older population into account. Being socially active and engaged may be positive for those with different personalities and characteristics living in certain circumstances.

Character Development of Female Protagonists Essay

In both stories they featured a female protagonist undergoing major character developments and mentality change from first sentence to last. They experienced complex, life-altering events and made crucial decisions resolving said events. I believe, although both stories showed the characters undertaking change, they didn’t portray the outcome as positive change. The conflict of Lamb to the Slaughter is when Mary’s husband revealed he wanted a divorce. â€Å"Her first instinct was to reject it all, not believe anything.†(Dahl, 153) She had a drastic mentality change: she murdered him and created an alibi of coming home finding her husband dead. This was due to her feeling betrayed by her husband leaving her when she was pregnant. The conflict of The Necklace is when Mathilde gets invited to a high-class party however she had no dress to wear. â€Å"No†¦there’s nothing more humiliating than looking poor in the middle of a lot of rich women.† (Maupassant )This drove her to borrow a valuable necklace but ends up losing it and having to pay for a replacement. Mathilde and her husband fell into debt and became more penniless than before simply because she desired her fantasy of opulence. It’s evident in both stories, the development in the main protagonist. Mary started as a loving, faithful housewife and became a deceitful, strong killer. Mathilde started as a well-off but unsatisfied woman and became impoverished but content. It’s shown at the end that the women aren’t in greater situations than before the conflicts occurred. Works Cited Bibliography: (Dahl, R. Lamb to the Slaughter, New York: Harper’s Magazine, 1953) (Maupassant, G. The Necklace, Paris: Le Gaulois, 1887)

Communication and Professional Relationships Essay

Unit 203 Communication and Professional Relationships with children, young people and adults. When dealing with children you need to take into account their age and stage of development. Different ages require different levels of attention and support. When dealing with small children you need to remember that they are still developing their language skills and may need help communicating. When talking to them you need to get down to their level so that you don’t feel intimidating. You will need to listen to them and tell them to take turns while speaking, you also need to be clear when talking to them and make sure they understand what you have said by making them repeat it back to you. Small children tire quickly and cannot concentrate for long periods of time. Children in Ket Stage 2 are starting to mature and can communicate a lot better, they are able to hold a conversation and will invite others to talk first. In some cases you will still need to remind them to wait and take their turn when speaking. Older children who are in Key Stage 3 and 4 are able to communicate more freely with each other and adults, they are able to use technology which they use to stay in touch with each other. Sometimes teenagers become self-conscious and embarrassed when they have to talk with adults, so you need to give them time and encouragement to regain their confidence. Your own behaviour has a big impact on the children you work with, children always take the lead from the adults around them and how they interact with others. You cannot expect a child to behave in a certain way if you as an adult don’t. We can only ask a child to behave if we do it ourselves; this makes it easier for them to understand boundaries of what is acceptable. Children of different ages communicate differently depending on their age and level of understanding. Some might need extra encouragement where others need more physical contact. As they get older they learn to communicate in different ways so you will need to adapt your vocabulary accordingly. Children that have communication difficulties need to be able to take their time when speaking so they don’t feel pressured. You need to adapt to their individual needs and communicate according to that. Some children have a speech disorder or they may stammer so you should let them take their time when speaking and try not to fill in the words for them as this will add to their distress. You may need some special training such as British Sign language so you are able to communicate better; some children have special educational needs so you might need additional equipment in order to communicate with them. There are not many differences when communicating with adults and children, you need to always maintain eye contact and respond to what they are saying. You should treat them all with courtesy and respect. However when you communicate with children you need to remember that they need to see you in a formal role. You always need to be clear in what you say and they should know what is expected of them. You shouldn’t use complicated language which makes it difficult for them to grasp. Adults need to show children how to communicate and get on with others we need to show them how to value and respect others so they can do the same. Children always copy adults be it in a negative or positive way. You need to show respect for others and acknowledge what they are saying and thank them for their contribution. When communicating with children there are a number difficulties may arise, these may be because of the special needs of the learner, different attitudes towards learning of different beliefs. When working with children or young people with special needs you will need to take your time and not rush them so that they don’t feel under pressure. People who use sign language may not have many opportunities to speak and might become nervous. When poor communication arises between adults this often leads to conflicts this may be because of communication difficulties or misunderstandings. The best way to resolve this is by discussing the problems so it does not happen again. The longer these misunderstandings are left unresolved the more difficult they may be to put right. People of different cultures have different expectations, in some cultures eye contact is not permitted so those pupils may not pick up on the non-verbal cues and another way to communicate will be needed. If a child lacks confidence they might act in an aggressive manner if they are unsure about something. You need to adapt the way you communicate with the learner’s individual needs. The lack of communication also leads to disagreements this may happen if information is misread or perceived wrongly, we sometimes blame others for saying things we don’t agree with. When this happens it needs to be managed carefully so that there are no hard feelings afterwards. You must never be drawn into an argument with child however hard this may be. If a child is arguing with you, you will need to manage it carefully and seek advice from another member of staff. The legal requirements and procedures regarding data protection are: Every Child Matters (England 2003) based on Children Act 2004. This stresses the importance of sharing information between professionals. Data Protection Act 1998. In schools parents are asked a lot of personal information regarding their child e. g. health and medical information, records from other schools or records for children with special education needs. This information must only be used if needed. The Freedom of Information Act The Freedom of Information Act gives you the right to ask any public sector organisation for all the recorded information they have on any subject. Anyone can make a request for information – there are no restrictions on your age, nationality or where you live. There are many reasons to need information on a child or an adult but this information cannot be shared without the parents’ consent. If there is reason to believe that the child is at risk of harm by the parent or there are legal reasons then the information can be shared. If you attend meetings and are told confidential information then you need to keep it to yourself. You need to reassure the children that the information you have will remain confidential. If a child has a medical condition such as asthma and epilepsy then there should be a system is place to share this information with other adults in the school. In some cases there are photos of children in the dining room who have allergies to certain foods but the photographs will need to be removed if the premises are used by others in the evenings.

Crumbs bakeshop Assignment Example | Topics and Well Written Essays - 500 words

Crumbs bakeshop - Assignment Example Due to this philosophy Crumbs Bake Shop is successfully increasing its customers and is becoming a respected and recognized brand of US. Marketing Strategy of Crumbs Bake Shop consist on internet, radio, television and newspaper advertisement along with in-store efforts. Crumbs invests sufficient amount of money for its promotion, brand differentiation, and brand recognition. Crumbs believes that it is the leader in the market of gourmet cupcakes and makes every possible steps to market itself as perfect store of choice for delicious and attractive cupcakes (Randazzo, 2014). CULTURE: USA is a multicultural state but all its cultures love baked products and this is one of the reasons of Crumbs Bake Shop’s success. People of US likes delicious backed products of Crumbs Bake Shop and by fulfilling customers’ demands the company is successfully growing. SOCIETY: The western society is food loving society especially backed food. The society demands cupcakes and other bakery items and Crumbs Bake Shop knows how to meet customers’ changing demands (Moyer, and  Sullivan, 2014). High consumption of bakery food by US’s society creates more opportunities for Crumbs Bake Shop. One of the greatest strengths of Crumbs Bake Shop is its wide variety of cupcakes. It offers more than 50 different types of cupcakes to its customers (Peterson, 2014). The irresistible and delicious items in its menu delight customers and are one of the main reasons for customer retention. Another strength of Crumbs is its online availability; anyone can buy cupcakes from Crumbs Bake shop online. The major weakness of the company is its limited cash reserves. A growing food chain requires extensive amount of money to meet the expenses but unavailability of cash creates problems for the company. Increasing of too many retail shops within short time period and poor management policies are also a weakness

Group Project Assignment Example | Topics and Well Written Essays - 1500 words - 1

Group Project - Assignment Example The club has also provided an option for training parents along side the children so that they can also develop their skills. It is a good forum because parents get the necessary training and support they need to help their children. Pyramid club adopts early intervention strategies that are aimed at helping children, who show signs of mental difficulties instead of waiting until the problem worsen. It is very important to provide early intervention strategies to children, who show early signs of mental problems to prevent them from suffering severe mental cases when they become adults. The aim of this program is to provide children with social and emotional skills so that they can live a happy life. Pyramid meets the key requirements to cater for children suffering from mental problems (Ohl, Fox & Mitchell, 2013). The club provides evidence based intervention that demonstrates its purpose and analyses its needs clearly. In addition, the pyramid also provides a baseline for measurement and gives feedback on the outcomes. The club is well equipped with facilities for intervention and are enough to cater for all children. Well-targeted clubs like pyramid provide efficient intervention clubs that will later lead to better outcomes and improve children skills. Children are selected for pyramid club using Goodman’s SDQ questionnaire that is used to measure their social skills and emotional development. SDQ questioner is later replaced with ContinYou’s questioner that is provided by parents and young adults. This replacement is part of a screening process and evaluation of the club. Consequently, those who manage the club take part in post evaluation processes. This club was developed and has been extensively tested in the US. The assessment includes qualitative and quantitative measurement and response from children and young adults. The University of Ulster follows a strength-based research that reflects learners flourishing theory, and

Asa Philip Randolph Research Paper Example | Topics and Well Written Essays - 1500 words

Asa Philip Randolph - Research Paper Example He lectured at the Rand School of Social Science after the World War 1 (Randolph Biography 2014). Asa Philip Randolph was born in Crescent City, Florida in April 1889 as a second son of reverend William James Randolph, who was a tailor and at the same time a minister in the African Methodist Episcopal Church and Elizabeth Randolph who was a skilled tailor. After his graduation, Randolph did some odd jobs and dedicated most of his time in activities like reading, acting, and singing. For example, WEB Dubois’ â€Å"The Souls of Black Folk† greatly influenced him towards the importance of social equity (Lamar 1998). Asa Randolph Phillip is one of the few Black Americans who made tremendous contributions in history through their work and their influence to the general public. He was the leader of African American civil rights movement, the American labor movements and Socialist political parties. Asa Randolph Philip is responsible for organizing and giving leadership to the Brotherhood of Sleeping Car Porters, which is preponderantly regarded as the first black labor union. He is called the most dangerous black in America more importantly, because of the kind of influence he demonstrated to have across the American society (Harmon 2000). Asa Randolph Philip demonstrated his charisma, as he is responsible for what is called the historic 1963 march on Washington, where he led more than two hundred and fifty people. It is referred to as the March on Washington movement, which is said to have convinced President Roosevelt to issue executive order 8802 in the year 1941, which led to banning the discriminatory practices that were too evident in the defense industries during the Second World War. This movement was organized by B. Rustin, at which Luther King Jr. birthed his â€Å"I Have A Dream† speech (Hardy 1993). The march on Washington saw thousands of Americans joining hands and uniting under the slogan â€Å"jobs and

Where Human Life First Begins Coursework Example | Topics and Well Written Essays - 1000 words

Where Human Life First Begins - Coursework Example Mr. Will is the main root cause of the death of both Asha and her baby. The law must regard him to this manslaughter and convict him. It is important to note that murder is not necessarily executed using a weapon. It is also psychological caused death. Mr. Will is the father of the unborn baby never appreciated and loved the pregnancy. His hate began the moment Asha told him she was pregnant. This ended their happy five-year stay since Mr. Will was unhappy. The situation even moved from worse to worst when his attempts to persuade Asha to abort went in vain. This shows that Mr. Will had planned to kill the baby earlier through abortion. He had knowledge that abortion is illegal since it kills life and risky to the mother too. The intentions of Mr. Will to force abortion could also have killed Asha and Will knew that after the abortion the baby could die.Moreover, the gestation period of the fetus was cut short due to the violence. When Will hit Asha and she fell down stairs that are when Will actually killed the baby. According to the scientist, domestic violence is noted to be one of the modifiable risk factors that mainly result in adverse pregnancy outcomes (CDC 2013). In the world today, approximately 26.7% of pregnant women are physically abused during pregnancy (CDC 2013). The physical abuses include being beaten up, threatened with a weapon or verbally or even being thrown away. Out of the numbers, 10.9% of all those physical violence have ended up in premature births (CDC 2013).

SEE BELOW FOR INSTRUCTION Research Paper Example | Topics and Well Written Essays - 500 words

SEE BELOW FOR INSTRUCTION - Research Paper Example This paper discusses the components of Betty Neuman’s theory and how they can be employed in the nursing practice Every system that deals with patients is an exceptional array instrument that responds to the environment. Ideally, the responses are covered in a structure that determines the relationship with the environment. Consequently, the theory assumes that there are stressors that have universal tendencies that have a potential of upsetting the stability of the patients. The theory also assumes that the line of defense should act as a caveat to environmental stressors (Meleis, 2011). Essentially, the assumption is that in the absence of a barrier enables the stressor to penetrate the line of defense effectively affecting the well-being of the patient. Every patient has the internal mechanisms that act as a resistance to any form of external aggression. It is essential that potential risks to patients are determined and appropriate measures taken to deal with the issues that may affect the stability of the clients. The theory also notes that clients in hospital environments constantly exchange energy with external surroundings. Moreover, the model intimates that there should be prioritization in terms of identifying the first line of action in so far as dealing with the stressors is concerned (Meleis, 2011). The treatments should be ranked as a consequence of making treatment effective. Neuman’s theory focuses on the extent to which an individual can interact and relate to the environment. Patients have a basic reaction to the environment, and the degree of response leads to the depletion of energy effectively leading to illness. The flexible line of defense is an important component that acts as a barrier to potential threats (Meleis, 2011). Stressors portend a number of negatives that may affect the stability of a patient. Prevention is critical in dealing with the stressors. The primary treatment is important and

Steroids Research Paper Example | Topics and Well Written Essays - 1250 words - 1

Steroids - Research Paper Example Recently, steroids have been in discussion with the media. In addition, many sports related persons are heard or seen on media charged with the steroid abuse. However, steroids are comprised of several different names for example stackers, pumpers, gym candy, weight trainers, roids, gear, Arnolds (Lau ) and the most popular one is juice (Freedman 64). In recent years steroids are being used in the treatment of many diseases like asthma, lack of proper growth, cancer, osteoporosis and other skin related disease (Freedman 64). They are defined as a â€Å"class of lipids having a particular molecular ring structure called the cyclopentanoperhydro-phenanthrene ring system. Steroids differ from one another in the structure of various side chains and additional rings. Steroids are common in both plants and animals. In humans, steroids are secreted by the ovaries and testes, the adrenal cortex† ("Steroids." 1-1). Moreover, the chemical substances that are produced in the human body in order to control the metabolism are known as hormones. The hormones act as a courier that controls the actions of the body by sending messages to the body tissues (LeVert 96). Similarly, steroids are also like hormones, they are substances prepared in the laboratory and are known as synthetic steroids that are used for the treatment of medical issues (Freedman 64). The hormones in males for example testosterones are responsible for the improvement of male distinctiveness such as facial hairs, intensifying male voices or bu lky muscles. Males produce large amount of testosterone that helps in enhancement of male features. Anabolic steroids are also derived from male sex hormones testosterones. In addition, steroids are used by many health professionals for the treatment of several diseases but these steroids can be availed only by the medical prescription (Freedman 64). These are the natural steroids produced in the human body by a gland known as the adrenal cortex.

Crosstabulation analysis Essay Example | Topics and Well Written Essays - 750 words

Crosstabulation analysis - Essay Example Furthermore, even in the heinous crime of murder same age range is mostly being arrested by the police. It might not be evident, but the availability of prohibited drugs and the usage of it by the youth plays a major role in their delinquent activities. In an attempt to discuss whether youth violence is associated in their use of drugs, this paper presents the concurrent findings of the said relationship. Specifically, this paper focuses on the question of the connection of the use of marijuana or hashish of their friends to the involvement of the respondents in gang fights. The researcher used the data collected in the 1995 National Survey of Adolescents in the United States with 1614 valid results. The survey asked the respondents the likelihood of their involvement to gang fights since their friends are using marijuana or hashish. On this paper, the frequency of use of the prohibited drugs is the independent variable, and the involvement of those who used it in the said delinquency is the dependent variable. The researcher will then establish if there is a connection between the two variables by evaluating the results of the survey and using statistical tools to support its claim. According to Blumstein (1995), â€Å"drug abuse is an important factor that has affected criminal activity.† Paul Goldstein (1985) reiterated the taxonomy of the drug-crime connection as made up of three components such as the â€Å"pharmacological/psychological consequences (drug itself causes criminal activity), economic-compulsive crimes (crimes committed by the user to support his habit), and systemic crimes (crimes committed as part of the regular means of doing business in the drug industry)†. On the cross tabulation table based on the 1995 survey, the data showed that 12.2% (197 of 1614) of the overall respondents have engaged in the gang fights accounted it to the use of

Supply chain management Essay Example | Topics and Well Written Essays - 2500 words

Supply chain management - Essay Example The active participants in a supply chain are linked by information flows and physical flows. Information flows are the various communication channels that these firms use to coordinate and control the daily flow of goods and services in the supply chain. These channels are used by various partners in the supply chain as a conduit of information regarding their plans. Physical flows are the storage, transformation and movement of goods and services, and they constitute the most visible component of the supply chain. Supply chains find themselves competing against other supply chains due to the competitive nature of today’s markets (Lu 2012: 59). This has led to the creation of various forms of supply chain management modules. One of these modules of supply chain management is the green supply chain management. This involves the incorporation of environmental friendly practices in activities and processes that take place in supply chain. Green supply chain management requires i ntegration of environmental friendly practices in all levels of the chain of supply. This includes product design, material selection and sourcing, delivery of the final product to the consumer and manufacturing process. Firms should also consider the end of life handling of the product after it is used or after fulfilling its intended purpose. This paper aims to discuss green supply chain management. Green supply management is the process of using environmentally friendly implements and their transformation into byproducts that can improve or be recycled (Ehrgott 2009: 271). The basic principle of green supply management is to reduce costs while at the same time conserving the environment. When a company reconsiders its options and adopts environmental friendly solutions for their production activities, they are likely to reap substantial benefits (Worthington 2012: 104). This is because, instead of focusing on reducing the unit cost of production, a company strives to reduce overa ll production costs. This can be achieved by applying environmental friendly innovations, which can have a substantial impact on production. This is because most environmental solutions are cheap and easy to implement at no extra cost (Zhang 2010: 2). An example of this is a top European company that designed a system that would be using 95 horsepower. The engineer in this company re-designed the system by using pipes with a bigger diameter than the initial ones and reducing their length. This saw a significant reduction for energy in terms of horsepower to 7. This goes to show that environmental friendly designs do not necessarily mean spending a lot of money, but small changes can bring about tremendous benefits to a firm. Various factors have influenced the management of supply chains around the world ranging from the beginning of the global economy to changes in the environment. The environment has played a significant role, in influencing supply chains, to change their orientat ion towards environmental solutions. These solutions are effective and efficient in terms of costs and resource utilisation. Human utilisation of natural resources has been an on-going process since the beginning of life, which until a few hundred years ago, was a sustainable activity (Cohen 2010: 213). This is because up until then, the environment was able to cope and sustain the demands of humans. Today, human activities have

Wild Animal as Pet Essay Example for Free

Wild Animal as Pet Essay Many people in the world get pets every day, but why blame them? Theres nothing wrong with having a friend of another species. But, if you want a pet, there is one thing you shouldnt do. You should never take an animal from the wild, and keep them as pets. The reasons are pretty clear. I, myself, have learned from self-experience that they are tougher to take care of than your average cat, dog, bird, or fish. They are not used to a captive environment. This can be bad, considering that its probably not how they were meant to live. Another thing is that you may not be able to get as much information on the wild pet, because they simply arent meant to be one. You would be able to find much more information on domesticated animals; hence, you can take better care of a domesticated pet, rather than a wild one. Wild animals are scared easier. How many times have you approached a pond without all of the frogs jumping in the water? How many times have you actually been close to catching a bird or fish with your bare hands? (Well, I have, but thats another story.) Chances are that the animal will run, fly, or swim away. If cornered, it will attack out of self-defense. That brings me to another point. If you cant find that animal in a legal pet store, it is probably too dangerous to keep for a pet. Many wild animals have poisonous venom, or deadly scratches and bites. This can be very dangerous. Something close to that point is that the animal may be rabid, have salmonella, or some other dangerous decease or virus. The probability of this is much less if your pet is a domesticated animal that was legally bought. If you or your family get hurt or killed, just remember that you cant sue Mother Nature. I think my point is pretty clear. Dont take animals from the wild and keep them as your own pet. Am I, however, telling you not to get a pet at all? No. As a matter of fact, I am encouraging you to get one! Just as long as it is not from the wild.

Low employee satisfaction in Air Arabia

Low employee satisfaction in Air Arabia Air Arabia was launched in 2005 as one of the initiatives in low cost carriers segment in Middle East. Over the period of time it was able to build up a remarkable company name in the market along with a firm financial record of its own. After introducing problems related to Political, Social, Environmental and Technological (PEST) aspects of Air Arabia, this part concentrates on analyzing these problems with the help of basic organizational behavior theories. The report is divided in four sections, each one for Political, Social, Environmental and Technological aspects. In each section, OB concern of the problem followed by the problem from the case and the explanation is mentioned. People: Problem Statement: In previous section we discovered a problem that employees in Air Arabia were not satisfied with the low financial benefits provided against their high performance. Problem Highlight: Performance based Incentives Performance based incentives: This is a problem of pay for performance scheme. In pay for performance or say performance based incentive system, employees are rewarded in accordance to their performance. Now the problem is that employees can never be satisfied with the outcome of this particular form of reward system. This can be understood by Equity theory. Equity theory states that employees use to compare their position (here rewards) with those of other employees. So even an organization remain transparent in distributing incentives, until unless the employees themselves become satisfied in light of equity theory, the problem like the incentive problem in pay for performance scheme in Air Arabia remain standing.  [1]   Problem Statement: One of the major problems associated with employees is that company is not able to provide them with long term commitment regarding their performance appraisal and work effectiveness bonus. Problem Highlight: Performance Appraisal Performance appraisal: Performance appraisal is the measure of evaluating the performance of the employees. In air Arabia, the performance appraisal system presently in use incorporates the number of task and time limit of those task accomplished by the employees are recorded  [2]  . This forms the basis of the performance appraisal scheme in the company. (Performance-related pay, 2005) Now the problem in this scheme is that this does not count the quality and situation under which work is carried out. For example, in Air Arabia, the performance scheme is same for sales and administrative staff. Now administrative staff has clear work functions to follow whereas sales staff has to undergo filed work which is more challenging. The targets for sales staff are tougher to achieve than those of administrative staff. Thus the performance appraisal scheme in Air Arabia is not satisfactory and requires other schemes like 360 degree scheme etc  [3]  . Problem Statement: The case shows that Air Arabia exhibits problem of workforce management due to workforce diversity. Problem Highlight: Diversity Diversity: Leaders and managers in Air Arabia do not handle the workforce diversity effectively. In their effort to manage the diversity, they go with equal treatment strategy. In this strategy, each of the employees is treated equally irrespective of its cast, color, race and language they speak. This looks quite fair in first look but the approach is not helpful in country like Dubai. The country has people of different religion and cast, speaking different languages and has different educational schemes and mental aptitude  [4]  . Now the problem is some particular type of employees are always advantageous of this equality approach. For example, the work force of India is more fluent in English than the natives of UAE. UAE culture gives emphasis on Urdu and not English. Now because of low proficiency in English and the equality approach in diversity management, UAE natives are mostly under-rated than few foreign classes of employee. This introduces a sense of dissatisfaction and un-happi ness towards the job. Problem Statement: employees of Lufthansa Air went on strike to improve their working conditions. Problem Highlight: Work Environment Work environment: Work environment is a major constituent of an effective organizational culture. The work environment not only constitutes the physical constituents of the location but also the culture of the work like senior-subordinate relations, type of communication etc  [5]  . The situation here shows that the employees of Lufthansa Air are not satisfied with the work environment and went on strike. The actual reason for the dissatisfaction was companyà ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬Ãƒ ¢Ã¢â‚¬Å¾Ã‚ ¢s pressure to work more than the required 8 hours to answer the increasing competition in aviation industry. This decision was not welcomed by the staff as it resulted in more hastiness in job and thus resulted in improper work conditions in the company. (Listening, the Doorway to Employee Commitment, 2005) Environment: Problem statement: Air Arabia had to reduce some of its other expenses like HR expenditure and to make it possible it has reduced intake of employees that had increased work pressure over presently working employees tremendously. Problem Highlight: Work Environment and Employee Shortage Work environment and employee shortage: The problem here is of bad work environment due to excessive work load because of lesser number of employees. The problem was resulted due to high oil prices which forced the company to shrink the workforce. This shrinkage resulted in high pressure on present work culture and thus decreased efficiency of work environment. Problem Statement: High operational cost which is internal factor of employee malfunctioning causing external effect over organization. Problem Highlight: Employee Inefficiency and Lack of Motivation Employee inefficiency: Lack of motivation The employees in Air Arabia were found to be less efficient and thus the company was compiled to increase its fare to sustain pressure of increasing oil prices  [6]  . The main cause of this problem can be lack of motivation in the employees towards the companyà ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬Ãƒ ¢Ã¢â‚¬Å¾Ã‚ ¢s growth. If the employees would have been more motivated, they could have been more efficient and thus the problem of price hike because of high operational cost could have been prevented. This is a clear case of less motivated work force. (Listening, the Doorway to Employee Commitment, 2005) Problem Statement: Most of its employees have to work under pressure basically for the sustainability of the organization which has raised the level of employee dissatisfaction in the company Problem Highlight: Employee Dissatisfaction Employee dissatisfaction: There are a number of competitors of Air Arabia in low cost aviation industry which forces employees to work harder with limited resources. This results in greater employee dissatisfaction towards the workplace and more employee turnover rate. Technology: Problem statement: But all these technical advancements have an upper limit beyond which it cannot be stretched, and at that point employee performance comes into picture and has to be taken to its best possible level. Problem Highlight: Employee Training Employee training: The problem here is that when new technology is introduced in the company to cut operational expenses, the work and expectation from the employees also changes a lot. So there is a clear need to employee training. Employees are needed to be trained at new technology so that they are able to be a part of companyà ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬Ãƒ ¢Ã¢â‚¬Å¾Ã‚ ¢s cost cutting scheme. Employee training is a necessary part of any organization which needs to be happen periodically  [7]  . Structure: Problem Statement: as employee commitment is an important issue and it cannot be handled by the organization without proper structuring and it is also one of the important issues faced by Air Arabia Problem Highlight: Leadership Leadership: In the case, we found that employees are not committed to the organization. This is the responsibility of the leader to keep the faith of the employees in the organization. Thus the company needs its leaders to take more active role. The leaders in the company need to motivate the employees and to maintain the commitment of the employees in the company. The structuring component in this problem is more of a requirement of a leader  [8]  . Problem Statement: Upper management is facing a problem to retain its entire structure which is similar to the case of Lufthansa Airways. There may be a need for an improved format of organizational behavior needed in this regard that can be provided with the help of proper training Problem Highlight: Training Training: The problem here is that due to the high instability of labor market in airline industry, the company is unable to maintain its talent pool which again is introducing instability in its organizational structure. This instability is supposed to be handled by reducing job turnover rate by more motivational training to its employees  [9]  .

Canada and Chemical Weapons :: Canadian Canada History

Canada and Chemical Weapons Chemical weapons date back the Peloponnesian war of 428-424 BC when they were used against the Spartans; the chemicals used were incendiary devices and sulfur-based gases that were blown by the wind onto besieged cities. The chemical weapons used then aren't nearly as deadly as those used in more recent times such as mustard gas, they were more to cause there enemies to retreat. There have been many incidents in history in which chemical weapons have been used as I have found in two articles on the history of chemical weapons. The articles I found are "A Short History of Chemical Weapons", and "Creating the Faith: The Canadian Gas Services in the First World War". Chemical weapons have been used in many occasions in war, including Ancient Times, The Middle Ages, World War I, and World War II and so on throughout time. Many kinds of chemical weapons have been used but modern chemical weapons started on April 22, 1915, with the Germans use of Chlorine gas on the Allie troops in WWI. In this incident 6,000 cylinders of the gas were released by 2 battalions along a 6 kilometer of the front, and the wind dispersed the clouds of gas killing 5,000 soldiers and putting 1,500 more out of the war. This caused great panic because nothing like this had happened before and wasn't expected by the allies. Previous to this event in the Middle Ages they used such things as arsenic and more natural things as chemicals which were as powerful as the chlorine gas ended up being in WWI. Chemical weapons were used many times after the Germans used chlorine gas in WWI, chlorine, phosgene, benzyl bromide, hydrogen cyanide, and then mustard gas in 1917. Mustard gas bec ame the worst and most popular chemical weapon used when it came out because of how harmful it was to the enemies; in addition it was figured that 1,300,000 soldiers were killed by the chemical weapons by the end of WWI. This essay stated that: "If the first World War had continued for yet another year it would indeed have been called the first Chemical War" (A Short History of Chemical Weapons) In WWII the use of chemical weapons decreased a lot and was only used in the Far East. Since WWI has really been called the birthplace of chemical weapons Tim Cook starts his article there with the Germans use of chlorine gas and how chemical weapon use escalated from that point.

The Power of Spoken Word Poetry Essay -- performing art

Each year, City High School holds a poetry cafà ©. During this event, many young adults have the opportunity to get up and perform for their peers. This past year, a plethora of young adults choose to perform spoken word poetry. Some demonstrated issues that multiple people deal with and others expressing who they truly are within themselves. Spoken word poetry is a necessity to openly discuss the issues that affect today’s youth. Spoken word poetry allows young adults to deal with issues of gang violence. Two young men by the names of Nate Marshall and Demetrius Amparan recite a spoken word poem â€Å"Lost Count: A love story† because of the death of children that occurred in their neighborhood in Chicago that year. The poet’s voice is valued because they experienced firsthand the danger of growing up in the ghetto: â€Å"Though Marshall's mother worried about his long commute to Whitney Young, it was the walk though his own neighborhood that frightened her the most. One day, during his junior year, four thugs jumped him at 115th and Halsted Streets as he was getting off the bus on his way home from school†(Turner â€Å"Poets Tell Story of Chicago School Children Killed). With the streets being so dangerous, mothers worry about their kids simply walking to school. The fear of a child being shot in the streets is very real. Statistics from the crime lab at University of Chicago demonstrate this: â€Å"In the year of 2008, 510 people were killed and nearly early half were between the ages of ten to twenty-five and the majority of them being male† (uchicago.edu). . Through the poem Lost count: â€Å"A Love Story†, the two young men are telling a story of each of their classmates while speaking each name of a child that has died. Young adults in ... ... greater. Spoken word poetry shows great truths to the issues young adults experience today. The issues in our world tend to be over whelming. We need a voice and because of spoken word poets, we our provided with a way to. Works cited Turner, Dawn. "Poets Tell Story of Chicago School Children Killed." Chicago Tribune. N.p., 26 Oct. 2009. Web. 14 May 2014. "CRIME LAB." Report: Gun Violence Among School-Age Youth in Chicago. N.p., n.d. Web. 14 May 2014. "The Truth about Children and Divorce." Emery on Divorce. N.p., n.d. Web. 14 May 2014. â€Å"Jason Taylor Foundation.† Jason Taylor Foundation. N.P., N.d. web 15 May 2014 Stlieber, Dave. â€Å"The power of spoken word poetry. â€Å"The Huffington Post. The Huffington Post.come, 12 Feb. 2014. Web.15 May 2014 "The Truth about Children and Divorce." Emery on Divorce. N.p., n.d. Web. 14 May 2014. The Power of Spoken Word Poetry Essay -- performing art Each year, City High School holds a poetry cafà ©. During this event, many young adults have the opportunity to get up and perform for their peers. This past year, a plethora of young adults choose to perform spoken word poetry. Some demonstrated issues that multiple people deal with and others expressing who they truly are within themselves. Spoken word poetry is a necessity to openly discuss the issues that affect today’s youth. Spoken word poetry allows young adults to deal with issues of gang violence. Two young men by the names of Nate Marshall and Demetrius Amparan recite a spoken word poem â€Å"Lost Count: A love story† because of the death of children that occurred in their neighborhood in Chicago that year. The poet’s voice is valued because they experienced firsthand the danger of growing up in the ghetto: â€Å"Though Marshall's mother worried about his long commute to Whitney Young, it was the walk though his own neighborhood that frightened her the most. One day, during his junior year, four thugs jumped him at 115th and Halsted Streets as he was getting off the bus on his way home from school†(Turner â€Å"Poets Tell Story of Chicago School Children Killed). With the streets being so dangerous, mothers worry about their kids simply walking to school. The fear of a child being shot in the streets is very real. Statistics from the crime lab at University of Chicago demonstrate this: â€Å"In the year of 2008, 510 people were killed and nearly early half were between the ages of ten to twenty-five and the majority of them being male† (uchicago.edu). . Through the poem Lost count: â€Å"A Love Story†, the two young men are telling a story of each of their classmates while speaking each name of a child that has died. Young adults in ... ... greater. Spoken word poetry shows great truths to the issues young adults experience today. The issues in our world tend to be over whelming. We need a voice and because of spoken word poets, we our provided with a way to. Works cited Turner, Dawn. "Poets Tell Story of Chicago School Children Killed." Chicago Tribune. N.p., 26 Oct. 2009. Web. 14 May 2014. "CRIME LAB." Report: Gun Violence Among School-Age Youth in Chicago. N.p., n.d. Web. 14 May 2014. "The Truth about Children and Divorce." Emery on Divorce. N.p., n.d. Web. 14 May 2014. â€Å"Jason Taylor Foundation.† Jason Taylor Foundation. N.P., N.d. web 15 May 2014 Stlieber, Dave. â€Å"The power of spoken word poetry. â€Å"The Huffington Post. The Huffington Post.come, 12 Feb. 2014. Web.15 May 2014 "The Truth about Children and Divorce." Emery on Divorce. N.p., n.d. Web. 14 May 2014.

What is an American? :: essays research papers

Let me ask you this: What is an American? There is no right or wrong way to answer this question. It is diffucult to compare an American today to an American two-hundred and fifty years ago, because the modern day America is so diverse that a label cannot be stuck on the forehead of today's society. There are many different ways that one can describe an American today, infact there are so many ways that I could never come close to covering all of them in this essay. I feel the three most effective ways to describe today's American are by the persons age, his or her priorities in life, and the way he or she chooses to present his or her physical self to others (fashion). Throughout the life of an American their age at the time usually determines what activities they choose to be part of. A sixteen year old boy would not choose to spend his Saturday afternoon doing the same thing that a 75 year old grandfather of 6 would spend his afternoon doing. The teenager might decide to play a game of baseball in the park, while the older man might decide to spend the evening with his grandchildren in his garden. Even though both of these people decide to busy themselves differently because of their age they are still Americans. So it is evident that a persons age is descriptive of what a person may choose do with themselves. Yet another description of an American are the priorities that he or she hold dear to them. One person may feel that their family is their greatest priority, however a man with no family would not feel this way. This man might feel that his greatest priority would be taking care of himself. This can also be tied in with age. A younger person might feel that his of her greatest priority is to their friends, but an older person might feel that their most important overall priority is to their children. Whatever a persons priorities may be it is true that many different Americans have many different priorities. Finally, the way a person decides to physically present themselves to others is a major descriptor of an American. Although some Americans care not what others think of their physical appearence, many on the other hand do. A certain high school girl might find pleasure in working an entire

S.C. Johnson & Son, Inc.

Steadfast commitment to the environment and spirit of innovation make S. C. Johnson & Son an outstanding achiever in employee and community relations (Tortorici, 2006, p. 1). This family-owned and huge manufacturer of consumer goods earned its worldwide success through focusing what is best for the employees, the environment and the next generation. As a corporate leader, it finds its way to international recognitions and accomplishments, by prioritizing the value of employees and community. Achievements earned in 2007 – worldwide sales grew to a record $61. 1 billion, an increase of 14. 6%, with operational sales up 11. 5%. Net earnings as adjusted of $12. 1 billion grew by 8. 6%. diluted earning per share were $3. 63 (Weldon, 2008, p. 3). In the year of 2006, a recent award was received from Ron Brown for corporate leadership and 2001 formulated the environmental classification system Greenlist. SC Johnson is fully committed to taking measures to safeguard the planet’s resources by utilizing environment-friendly materials. Johnson & Johnson is the world’s most comprehensive and broadly based manufacturer of health care products, as well as a provider of related services, for the consumer, pharmaceutical, and medical devices and diagnostic markets. The more than 200 Johnson & Johnson operating companies employ approximately 115,000 men and women in 57 countries and sell products throughout the world (Tortorici, 2006, p. 1). S. C. Johnson will definitely be my company preference since this organization provides opportunities for career advancement and professional growth. Its commitment to excellent employee practices such as its openness to diversity, training programs, cross-functional assignments and flexibility of work schedules makes it an outstanding workplace. According to Fortune Magazine, S. C Johnson is one of the 100 best companies to work for the year 2008. References Taylor, J. (2007, July 2). SC Johnson Web Site Features Company's Commitment to Doing What's Right. CSRwire. Retrieved April 20, 2008 from http://www.csrwire.com/News/9071.html Tortorici, F. (2006, January 11). Bayer Corporation, Johnson & Johnson and S.C. Johnson & Son, Inc. Honored By Presidential Award. Conference Board. Retrieved April 20, 2008 from http://www.conference-board.org/utilities/pressDetail.cfm?press_ID=2793 Weldon, W. (2008, March 12). 2007 annual report. Johnson and Johnson. Retrieved April 20, 2008 from http://www.jnj.com/investor/documents/reports/2007AR.pdf

Business Plan for a Clothing Company

The product I will be supplying to society will be a fashion store called FrSh. Popular culture is no longer regional. The tradition of cable television and the Internet has created a world where a fashion statement can make you or break you .FrSh will offer young customers the youth-oriented products and clothing that are popular in large urban areas but not available locally. The target customer is in their late teens to their mid 20s, who enjoys the urban scene and the city look, participates in youth sports like skateboarding and basketball, and looks toward new urban clothing trends in large city areas for inspiration. FrSh will provide the distinctive clothing, shoes and products that are just ahead of the fashion curve. I will create a cost-effective operation that will quickly bring new fashionable clothing and products to the customer. I originally cam up with this idea because I was fed up of people wearing the same clothes to fit in and wanted to find an alternative to what everyone was wearing so that I would stand out whilst fitting in. I have always enjoyed going to parties and with that comes the responsibility of looking good. I also made shirts whilst in high school and sold them to people. My goals for FrSh will be†¦.. * Accessible store where you always find something new that you want. * Excellent vendor relationship that will facilitate quick shipment of orders. * Establish an effective strategy for advertising to our target customers. * Create a store image that our target customers see as both attractive and trendy. FrSh competitive advantage is offering product lines that make a statement but won't leave you broke. The major brands are expensive and not distinctive enough to satisfy the ever changing taste of our target customers. FrSh offers products that are just ahead of the curve and so affordable that our customers will return to the store often to check out what's new. Another competitive factor is that products for this age group are part of a lifestyle statement. FrSh is focused on serving the Urban youth. We want to represent their style and life choices. We believe that we will create a loyal customer base that will see FrSh as part of their lives. We will pride ourselves by setting the most affordable prices for our consumers. We will cover all of our liabilities and make sure we will have contracts will all of our partners which we will be considering into bringing into the company. W will be running a close cooperation. FrSh will advertise in the Universities and daily student newspapers and free Weekly papers, which is focused on FrSh target customer groups. FrSh will also plan three events to raise its visibility with target customers. We will assemble a group of boy and girl Dancers and sponsor them with the FrSh logo. The Dance competition will be followed by a street basketball game. Smokejumpers will book a local popular alternative college group to play at the event. We will find co-sponsors for the events that are also focused on the same target customers. At these events, FrSh will distribute stickers, hats, t-shirts, and promotional material offering 50% discount on purchases this will draw us customers.

A Debate Pertaining to Illegal Immigrant Children in Public Schools

Roxie Vasquez ENG 102-2270 03/25/06 Research Paper A Debate Pertaining to Illegal Immigrant Children in Public Schools â€Å"The terms â€Å"illegal immigrant† and â€Å"illegal alien† are commonly used phrases that refer to the illegality of the action of migration without legal authorization† (wikipedia). Whether or not illegal immigrant children should be educated at the elementary, middle school, and high school levels in the U. S. , is a fiercely debated topic these days. Many debates are taking place all over the U. S. ertaining to whether or not illegal immigrant children are entitled to a free public education. One major debate taking place here in Arizona is that Governor Napolitano and â€Å"its controlled Legislature are locked in a stalemate over the teaching of the English language and how much to pay for it† (nytimes). Furthermore, illegal immigrant children should be given the chance to be educated in the U. S. and should not be banned from public schools because of their parent’s actions. Illegal immigration is a crime and sneaking into the country is in violation of the immigration law.For many illegal immigrant children, it is a tragedy to be raised here in the U. S. as an American child, to later learn that all their life-long goals and dreams they worked so hard for, aren’t realistic because of their illegal status. The illegal status of these children becomes very deceiving to them because as a young child they have no idea that they are illegal immigrants. It is even more devastating for that child (when the possibility arrives) that later in life that child might have to return to that â€Å"unknown foreign country† they were born in.Also, the American people who live in areas consumed by large amounts of immigrants are concerned about their school budget and the quality of education their child receives. To begin, one opposing argument against illegal immigrant children attending public sc hools is that it is widely believed that America cannot financially afford to educate the world’s children. Immigrant children attending public schools accounts for the dramatic increases in school enrollment, and failure to consider the capacity may have very real consequences for future public education in the U. S†¦Programs created specifically to serve students whose second language is English accounts for much of the extra costs and it is reported from Census that immigrant children accounts for such a large percentage of the school-age population. â€Å"An estimated 400,000 illegal immigrant children enter the U. S. each year and educating those children costs several states more than four billion dollars annually† (ap/online). Here in the state of Arizona, Governor Napolitano has â€Å"proposed spending $45 million a year to expand the English-language instruction in Arizona’s public schools† (nytimes).Secondly, a disagreement pertaining to il legal immigrant children attending public schools is that public schools in the U. S. are open to all children, in spite of their status and by law; it is mandatory that all children attend school. Also, the law states that each and every child, despite their legal status, is required to attend school from the age of six years to 16 years of age. The only necessary information to give in order to attend a public school is proof of residency in that district the child wishes to attend, a birth certificate, and vaccination records.In addition to laws, â€Å"Proposition 200 requires Arizonan’s to provide proof of citizenship when registering to vote and apply for public benefits† (azcentral). Because of this law, a numerous amount of Americans are appalled that an illegal immigrant child can attend free public schools without showing any proof of citizenship. In 1982, the U. S. Supreme Court ruled five to four, that undocumented immigrant children are entitled to a free p ublic education. Also, it is common knowledge that â€Å"the action of INS has no effect on rules governing school enrollment† (heraldnews).In addition, each year, thousands of women flee from their country to enter the U. S. and give birth, knowing very much that their child will automatically have U. S. citizenship. Because of this, illegal immigrant children are not to blame for their status. It is not the child’s fault that their parent brings them illegally into this country because a child has no knowledge of illegal immigration or of immigration laws. Too, most children believed to be illegal immigrants are actually U. S. -born American citizens, born to an illegal parent.It is a fact that â€Å"22 percent of all American children under the age of six have immigrant parents† (ap/online). Also, all children, regardless of their legal status have â€Å"full rights to a free public education† (weeklyreadercorp. ). Besides, all illegal immigrant childr en deserve a chance to change their situations and paths in life because â€Å"illegal immigrant children are a future part of society and are worth the same investment as an American born child† (softcom. net). Almost all of the several million illegal children that are here will be life long Americans and are likely to be productive adults if they receive support now.As these illegal immigrant children are raised as an American born child, they will grow up knowing nothing else but the American born child’s way of life. Plus, some stress that money spent on educating immigrants, both legal and illegal, will pay off in future tax revenues as they will earn higher wages. â€Å"At this point, Americans are under the false assumption that illegal immigrant children are a distant and separate population that exist apart from the rest of American society† (losangelestimes) and they are wrong: immigrant children in public schools total close to half the percentage of citizen children.Besides, it is reported that one in every five student has an immigrant parent. Moreover, â€Å"under Title 8 Section 1325 of the U. S. Code, â€Å"Improper Entry by Alien,† any citizen of any country other than the U. S. who: enters or attempts to enter the U. S. at any time or place other than as designated by immigration officers; or eludes examination or inspection by immigration officers; or attempts to enter or obtain entry to the U. S. by willfully false or misleading representation or the willful concealment of a material fact; has committed a crime† (wikipedia).Hundreds of thousands of law-breaking illegal immigrants marched in America’s streets demanding that their right to live, work, and attend free public schools in the U. S. illegally, be respected. Even though America is a nation built upon immigrants, an illegal immigrant should not get a free ride towards citizenship just because they have lived and worked and had children here for years. The U. S. Congress is preparing to reward those who have broken our laws with the most precious treasure, the opportunity to become U.S. citizens. Thus, some lawmakers have pushed for the prevention of illegal immigrant children being educated even at the youngest grade levels. As it stands now, an illegal immigrant child does not qualify for tuition benefits, but some states have passed laws allowing illegal children residency tuition benefits. Plus, the thousands of children from families of illegals who crowd school classrooms, challenges the claim that illegal workers contribute more than they consume.It reportedly costs the state of Arizona â€Å"$750 million to educate the children of illegal immigrants† (azcentral). What’s more, the â€Å"Federation for American Immigration Reform estimates that illegal immigrants cost each Arizonan almost $700† (ap/online) a year; a hidden tax that subsidizes illegal aliens and the employees who hire them. Fu rthermore, if illegal immigrant children are denied the right to a free education, they could end up being illiterate criminals who tap into social services and prison systems.The cost of incarcerating illegal immigrants in Arizona’s prisons and jails amounts to about â€Å"80 million dollars a year; not including the cost of the crime that led to their incarceration. It is far better to have these children in school rather than to have them roaming crime-ridden neighborhoods day and night† (findarticles. com). Over the past several weeks, the debate over immigration overhaul has reached a boiling point, with hundreds of thousands taking to the streets to protest tighter controls on border security.As an effect of the debate to whether or not illegal immigrants have a right to attend public schools, a majority of the illegal immigrant students have recently walked out of school to protest immigration laws. Many illegal students said they were â€Å"marching in opposit ion to a bill sponsored by Rep. F. James Sensenbrenner (R-Wis. ), that passed the House in Dec. ; the bill would give police more power to enforce immigration laws† (chicagotribune). Although it is not an issue for legislature yet, many illegal immigrant students cannot register for college because they do not have a social security number.In all, if the world wasn’t fighting over free public education for everyone, then the world’s children would continue attending class and would be safe in school and off the streets. In conclusion, some Republicans have portrayed illegal immigrants as â€Å"invaders, criminals, and as burdens to society† (nytimes). Each year the Border Patrol arrest more than a million illegal aliens who flagrantly violate our nation’s laws by unlawfully crossing U. S. borders, often with the aide and help of fraudulent documents.All in all, illegal immigrants do not contribute more than they cost because the millions in prison a nd on welfare aren’t contributing a dime to our economy and the ones who are working are often paid in cash without tax deductions. America has a way of bringing us in, welcoming us and allowing us to become a part of the whole. What’s more, illegal immigrants migrate for a better future, education and rights. Thus, the U. S. has taken on many races, religions, and nationalities and has made them one nation; America has always been a nation built upon immigrants.

Horror Story Example Essay

The girl stumbled and rolled down the grassy hill, pulling her fiance with her. For a few minutes they fell, rolling on top of each other before landing in a heap on the soft sand below. The woman looked at the man below her, affection filling her eyes as she smiled subconsciously. â€Å"What are you smiling at? † He inquired flipping her over so he was on top of her. â€Å"Just wondering if why on earth I’m marrying someone as ugly as you; do you think it’s too late to pull out? † The girl answered giggling. â€Å"Oh really!† Her fiance answered standing up, grabbing the girl’s waist and spinning her around. â€Å"And yes, it is too late to pull out. The wedding is in two days whether you like it or not. † He added defiantly, placing the dizzy woman on the ground. She hiccupped, trying to gain her balance. Her fiance let out a thunderous laugh, she glared at him. â€Å"Don’t laugh at me! It’s your fault! † She groaned, folding her arms across her chest. â€Å"The alcohol’s got to your head then? Oh well, more fun for me! † He said, waggling his eyebrows suggestively. She rolled her eyes and ran in the direction of the sea. â€Å"Race you to the water! † She called over her shoulder childishly. She heard her fiance chuckle from behind her as she reached the water. She started walking further out to sea; her heart skipped a beat as her fiance tackled her to the ground. She yelped, a sudden spark of pain running through her foot. â€Å"Ow! Adam, you’ve made me cut my foot! Thanks! † The woman complained, playfully slapping Adam’s chest. He looked at her, a mischievous glint in his eye. â€Å"Oh, I’m sorry Nicky. Should I kiss it better?† Her fiance asked, grabbing her leg with tender hands. â€Å"No you should not! Help me up and let’s swim! † Nicky said excitedly. Adam lifted her out of the shallow water and carried her the rest of the way out, before very carefully dropping her back into the water. Together they swam around in the salty, inky black sea. Nicky felt a strong force knock her left foot from below her. â€Å"Adam, did you just knock my foot? † She asked him, worried something was under her. â€Å"Nope wasn’t me! I wouldn’t worry about it my love. Nothing out here can hurt you.† He swam over to her, grabbing her hand in his. All thoughts and worries disappeared from thought as they kissed passionately in the moonlight. â€Å"I love you Nicky foster. † Her fiance stated truthfully, gazing into her eyes. â€Å"I lo-â€Å"Suddenly they were pulled under water. Nicky let go of Adams hand and swam to the surface, looking around her frantically for her fiance. She quickly regained her breath before going back under water but he couldn’t see a thing in the murky, dark depths of the sea. Nicky resurfaced. Panic clouding her mind. Unexpectedly a hand rose out of the water, she let out a gasp of shock as she pulled at the hand and screamed, pure horror now coursing through her veins. The object in her hands belonged on her Adam’s arm. The bone was exposed, muscle and flesh was ragged and torn, fresh warm blood was dripping onto Nicky’s hand. Salty tears ran down her face, mixing with the gentle current. She threw the hand into the sea and tried to swim for shore, but her left leg was searing with pain. A wave of nausea passed over her as Nicky, teary eyed and heartbroken felt down her leg. To her utter terror, her leg had been ripped to shreds, blood pulsing from the stub. She panicked, thrashing around in the cold water. Swiftly a great force pulled her under. She could feel her bones being crunched, her organs being squished. The sea around her turned red with her blood. She screamed, only small bubbles of precious oxygen escaping her bloodless lips. She closed her eyes and tried to imagine Adam, the sweet loving man she was going to marry. Instead all she could think of was images of his ripped, lifeless body. These images haunted her to her death.

Vendor-specific Objective Evidence

Hemo-Tech Case Presentation Outline * 1 Myles Intro: Facts: * 1 Issues: Multiple Element Arrangement * How should revenue be allocated to each deliverable? * What sales price should be allocated to each deliverable? * How are deliverables defined? * 25-4 â€Å"A vendor shall evaluate all deliverables in an arrangement to determine whether they represent separate units of accounting. That evaluation shall be performed at the inception of the arrangement and as each item in the arrangement is delivered. * 25-5 â€Å"In an arrangement with multiple deliverables, the delivered item or items shall be considered a separate unit of accounting if both of the following criteria are met: * a. The delivered item or items have value to the customer on a standalone basis. The item or items have value on a standalone basis if they are sold separately by any vendor or the customer could resell the delivered item(s) on a standalone basis. In the context of a customer's ability to resell the delive red item(s), this criterion does not require the existence of an observable market for the deliverable(s). b. Subparagraph superseded by Accounting Standards Update No. 2009-13 * c. If the arrangement includes a general right of return relative to the delivered item, delivery or performance of the undelivered item or items is considered probable and substantially in the control of the vendor * 25-6 â€Å"A delivered item or items that do not qualify as a separate unit of accounting within the arrangement shall be combined with the other applicable undelivered item(s) within the arrangement.The allocation of arrangement consideration and the recognition of revenue then shall be determined for those combined deliverables as a single unit of accounting. † * * warranty, update machines * 2 Sandra Alternatives: * Company’s selling price to a different customer * A different company’s selling price of the same product * Selling price of a similar product’s prof it margin, applied to the total costs of product * Proportional based on costs * 3 4 Troy Jessie Literature: Multiple-Deliverable Revenue Arrangements: ASC 605-25 * Vendor-specific objective evidence:   ASC 605-25-30-6A * 30-6A Vendor-specific objective evidence of selling price is limited to either of the following: * a. The price charged for a deliverable when it is sold separately ( annually, supplies-$3,000 per box, monitor and test-$600,000 annually) * b. For a deliverable not yet being sold separately, the price established by management having the relevant authority (it must be probable that the price, once established, will not change before the separate introduction of the deliverable into the marketplace). Third-party evidence: ASC 605-25-30-6B * Third-party evidence of selling price is the price of the vendor’s or any competitor's largely interchangeable products or services in standalone sales to similarly situated customers. * screen and report services-$730,00 0 median price * Estimated selling price: ASC 605-25-30-6C * The vendor’s best estimate of selling price shall be consistent with the objective of determining vendor-specific objective evidence of selling price for the deliverable; that is, the price at which the vendor would transact if the deliverable were sold by the vendor regularly on a standalone basis.The vendor shall consider market conditions as well as entity-specific factors when estimating the selling price. * equipment * 5 6 Kelly Crystal Recommendations * IFRS: IAS 18? Type: Revenue Recognition Subject: Accounting for multiple-element revenue transactions under U. S. GAAP   (specifically identifying deliverables and determining selling price) and exploring the sources of IFRS guidance for such transactions

Complete a lab report using the scientific method

Complete a using the scientific method - Lab Report Example is case, the understanding the microvariability degree of the soil in an area, together with factors that lead to variability is extremely vital for experimental and practical agriculture (Kang, 2008). In order to gain knowledge on soil microvariability, this paper explores the variation degree in some soil and the maize yield. In this paper, we hypothesize that there would be more yield in an arable land than in nonarable land. The null hypothesis of the study will be that there would be a higher maize yield in arable land than in non arable land. The impact of mineral nitrogen fertilizer was observed on the yield of maize crop. This yield was measured in milligrams of dry mass harvested in 100 acres for a period of a year. The process was done for both arable and non arable land in the sites close to Germany, and Malle. The maize yield was observed from 1990 to 1988. The climate variation on both types of land were also recorded. From the results, it is evidenced that in a percentage nitrogen concentration of 0.12, there was more maize yield in nonarable land than in arable land. This shows that there were differences in the management practices involved in the arable, and in nonarable land (Moss, 2007). It can also be agued out that the amelioration, and fertilizer addition in the different soils were responsible for the different yield of maize (Murphy, 2006). In this respect, the study rejects the null hypothesis thus adopting the alternative hypothesis of the experiment. In this respect, the alternative hypothesis includes; a lower yield in an arable land than in nonarable

Weekly ass. #10 Essay Example | Topics and Well Written Essays - 250 words - 1

Weekly ass. #10 - Essay Example business cant afford, try living in a world without it.† [2] Our Government has also taken initiative to honor the best organization that has effectively followed this principle of "eco-friendly business†. Major issues of global warming and climate change are faced by our planet. These problems affect badly to mankind, scenery and animals. Hence, I request you to help the environment by following "eco-friendly business" factor. There are many ways through which we can help the environment. We can avoid using extra wooden infrastructure and wasting papers in our offices. We can reduce the rate of releasing gases that are harmful for the ozone layer. It is very important for humans to survive on earth. The award of best "eco-friendly business" will be a token of respect, and it will be a great achievement for our company if we win this award. Our efforts will definitely help the environment and increase the awareness of eco-friendly nature of chemical industry. I hope that you will consider our mission of eco-friendly business in future while developing our business. â€Å"The only way we can do this is if we get back in the world’s fight against global warming and prove it is good economics that we will create more jobs to build a sustainable economy that saves the planet for our children and grandchildren. It is the only way it will work.†

American Religious groups and History Essay Example | Topics and Well Written Essays - 1000 words

American Religious groups and History - Essay Example Religion has played a vital role in the establishment of major universities and learning centers such as the Harvard, Princeton, Williams, and Yale among others. Different regions of the country have different representations of the religious groups with the rural consisting of few Catholics except some areas such as Louisiana and the Gulf Coast. Most of the Catholics are in the urban areas such as the Great Lakes and the industrial and mining regions. Judaism is also a religious group in America and is the second largest after and Frank y. Many of the people prophesying Judaism faith are Jews and their descendants and have existed since the 17th Century. Islam takes the third position in America although it just represents a 0.9 percent of the entire population. The other religious groups include the Rastafarianism, Baha’i among others. There are people who do not profess affiliation to any religion and are associated with Atheism, Agnosticism, and Humanism. This population i s increasing at a high rate although they are associated with materialism, criminal behavior, and cultural elitism. America is, therefore, experiencing an increase in religious groups and increase in those who profess no religion. During the period of religious movement in America, the great awakening led to divisions among the denominations such as Baptists, Methodists, and the Presbyterians. Although the first American Protestant Mission was in 1820 in Hawaii, most of the triumphalism happened in the 1960s.

Northern Ecology Essay Example | Topics and Well Written Essays - 1750 words

Northern Ecology - Essay Example The lack of vegetation is also due to cold winds that characterize the region. This results in a unique ecological system inhabited by exclusive organisms adapted for survival under such conditions. The climatic condition is, therefore, an integral aspect of the ecosystem that influences the distriburtion, population, and diversity of the organisms inhabiting such ecologies (Krupnik 12). The arctic tundra extends in the regions of Russia, Canada, and Iceland. Despite the harsh climatic conditions, the arctic tundra is an enabling environment for the survival of a number of plants and animals, which, therefore, create an effective ecosystem. Apart from the boreal forests, the region is inhabited with such unique animals as polar bear, arctic wolf, and fox. The animals have learnt the necessary skills to enable them survive the harsh winters and the long nights most of which last for months. The conditions are not favorable for most organisms. However, these animals among other organis ms in the region have developed specific features to ensure that they survive in the climatic conditions. The fact that they have inhabited the regions for several years alludes to the development of adaptive features, which make the subsequent generations better prepared to live in the ecosystem. Just as in any other ecosystem, the animals relate and interact freely, thereby, constructing food chains and webs, which sustain the survival of all the animals. The most common herbivores in the ecosystem are arctic hare, caribous, and lemming among others. Such animals survive on the scanty vegetation in the region (Sperry 75). It includes such a vegetation as the leaves of the undergrowth of the boreal forest among any other rare plant. To survive under some of the worst climatic conditions in the region, most of the animals get into a period of reduced metabolic activities. During hibernation, the body consumes a decreased amount of energy, and the animals, therefore, does not eat sin ce their bodies require a small amount of energy capable only of carrying out the basic metabolic processes such as breathing (Bruemmer 45). Through hibernation, therefore, the animals survive under the harsh climatic conditions and the lengthened night hours most of which consist of reduced metabolic activities. The animals make themselves sleep for months. This is an adaptive trait for most of the animals since the period is normally long and characterized by unfavorable ecological factors. No organism would, therefore, survive this period, a factor that substantiates the need for the long spell of sleep, the time within which the natural climatic factors change until they make a complete loop. They, therefore, begin to favor the increased activity in the ecosystem as the animals take the chance to hunt for food and to find mates, thereby, continuing the lineage of the species of the particular organisms. In the food chain, the herbivores provide food to an assortment of predators who employ a number of tactics to obtain food. This results in a survival of the fittest, the situation in which the predators try to obtain the scarce food while the prey also tries to evade the attack from their predators and, therefore, survive. Polar bears are among some of the most conspicuous predators in the ecosystem. They are carnivores and must kill other animals for survival. The animals are huge and are the most predominant in the ecosystem. They have a number of survival adaptations, which make their

Business Writing Assignment Example | Topics and Well Written Essays - 750 words

Business Writing - Assignment Example While preparing the draft, Kathy should take into consideration the detailed information available on the subject which includes various opinion and suggestion of the persons on the matter, her own opinion and perspectives, etc. Based on these inputs, Kathy would need to decide on the parts of her writing which needs to be edited, added or replaced. After preparing the draft, Kathy should read the piece to herself in order to be sure that her writing is properly structured and follow a logical flow with meaningful interpretations. In the draft written by Kathy, she should also look to remove redundant words which do not add sense to the piece of writing. The draft that is prepared by Kathy would need to be revised in order to make sure that the sentences written by her are structured, logical and meaningful. Kathy should look to present her writing in a better manner and use separate paragraphs where necessary. Kathy could also look to take suggestions and feedbacks from her peers in order to improve her writing skills relevant to the piece. After performing these steps, Kathy should make sure that she proofreads the piece written by her. This step is important for Kathy to produce a piece of writing to the target readers which do not contain any grammatical errors, errors in punctuation, spelling errors, etc. In this activity of proofreading, Kathy would need to make sure that all sentences in the writing piece are complete, simple and meaningful. Kathy would be able to remove her confusion in process of writing by performing these steps and would be able to produce a completely structured and perfect form of writing. Comparison of oral v/s written medium of communication: Advantages and disadvantages, examples In order to remove the confusion of Kathy in understanding the differences and applications of oral medium and written medium of communication, the advantages and disadvantages of both the form of communication should be explained. This would help Kathy to undertake the appropriate medium of communication in order to apply the same according to the need of the situation. The advantages of the oral medium of communication would help Kathy to resolve the issues faced the customers on an immediate basis. A good power of communication would help in resolving the customer complaints immediately (Kaul 15). The grievances could be settled in the front desk on an instant basis to the satisfaction of the customers in the hotel of Las Vegas. Thus effective oral communication would help in consolidating the customer relation for the Las Vegas hotel. The disadvantages of oral communication are that the facial expressions and emotions expressed during the communication process could not be concealed. This could lead to flaring of tempers. Once an oral communication is mishandled, it is very difficult to repair the relationship between the communicators. Thus Kathy should be careful of these disadvantages of oral medium of communication. In cas es where oral medium of communication is not effective, where maintenance of official records are necessary to validate the earlier communication held, the written form of communication would be advantageous and Kathy would need to adopt this form of communication. Moreover, written medium of communication is beneficial when the sender and the receiver of message are not within reachable distance.

Unit 3DB The Green Revolution Research Paper Example | Topics and Well Written Essays - 250 words

Unit 3DB The Green Revolution - Research Paper Example In this regard, energy conservation should be highly rated and considered if indeed the long term effects of environmental conservation are to be realised. In order to reduce personal energy consumption, the following changes can be made that would in the long run create a significant difference. To save car fuel energy consumed on daily drives to work, commuter trains and or bicycles can be used to achieve the same. This will not only reduce gasoline fuel consumption, but also help in environmental pollution. Concerning the other forms of energy use, such as the ones on lighting heating and cooking, renewable energy, specifically, solar and wind energy can be utilised. These energy forms are sustainable and also clean. On the other hand, to increase energy efficiency requires discipline in the use of already in place energy sources. This means small changes such as switching off unnecessary lights around the house, and using energy efficient light saver bulbs. In addition to this, electric appliances should be used as per the manufactures specifications. Household electric appliances account for nearly thirty per cent of home electric consumption. Therefore, efficient use will directly translate to efficient energy consumption. An electric vehicle consists of electric motors that are used to drive the car. These can be powered externally, through stored electric energy such as batteries, and through an internal energy source such as generators. Electric cars are considered to be efficient, clean, and most of all environment friendly. In this regard, yes I would purchase an electric vehicle because of its long term benefits. Fuel costs are bound to rise, that is guaranteed, In addition to that fossil fuel is not renewable and as such contributes to environmental degradation. Based on this alone, using an electric vehicle contributes to energy conservation, has long term cost benefits, and is also energy

ITM 301 Mod 2 CBT - Principles of Information Systems in Business and Essay

ITM 301 Mod 2 CBT - Principles of Information Systems in Business and Organizations - Essay Example the help desk solve the problems of the customers to the maximum, the following are some of the essentials in setting up of a customer service department: 1. Define the objective. According to Ruby Bayan2, the organization has to first decide what is objective of creating a helpdesk. Are you planning to give expert advice or are you planning to handle the maximum number of customers or is your objective to have a personal touch. When the objective is clear then, it is easy to set our priorities in organizing the other resources. 2. Understand the customer: When it comes to understanding the customer, an in-depth analysis is required about the profile of the customer. The customers’ type of business, volume of business, the type of technology adopted, the kind of problems faced by the customers frequently and what is the procedure adopted to solve customer problems. When an understanding of the customers’’ technologies and help desk management, we can choose the kind of service we have to offer. So we can get an idea about the kind of software to be used to achieve our objectives. 3. Select the technology: There is always a debate whether to buy software or to build customized software for your organization. The diagram below shows the factors that have to be considered before making a decision by the management. According to Hoffman3, the decision to develop a customized software should depend on the competitive edge it can create. When a software is very essential to create an edge over the competition and if it defines the basic purpose of the organization, the cost of development of the software is justified. On the other hand if the organization can use an off the shelf software the company should buy the software to reduce the operational costs and thereby can pass on the cost benefit to its customers. The author suggests that the organization can buy a software and adjust its operations according to the software implemented which will require less

Compensation And Benefit Problems At United Aryan- Kenya Research Paper

Compensation And Benefit Problems At United Aryan- Kenya - Research Paper Example Findings in this report are products of research in the United Aryan Company based in Kenya. The researchers carried out fifteen telephone interviews among employees occupying senior positions in branches in Kenya. These were managers with senior decision-making authority. The branches employees many people from five hundred to ten thousand.The interview covered local citizens as well as those working as expatriates. All the branches specialize in the manufacture of all types of clothes for export. Markets are broad and include countries in Europe, Asia, and others in the American continent. Researchers also prepared questionnaires and handed them to line managers and supervisors. One thousand two hundred copies with positive responses coming from nine hundred and ninety-six pamphlets.The focus of the interview was getting their views on their salaries and other benefits, challenges emanating from the company remuneration system, areas with potential benefits they consider best in th e company compensation scheme. The first of the challenges United Aryan-Kenya is facing is developing a strategy reminiscent with global benefit standards. The strategy should meet different needs of employees as applied in other companies with employees from various cultural setups. Trading in the international market provides United Aryan-Kenya with multiple opportunities for growth. The size of the workforce in the international market can be bigger than the one at in the local market depending on the performance of the company.

Time and Professionalism Essay Example for Free

Time and Professionalism Essay What is professionalism? There are many different forms of professionalism depending on whose opinion of professionalism it is. I will go with my opinion of professionalism. For the thirty years of my life I must say, I have learned a lot about my experiences in life. I’ve learned from myself, I have learned from my friends, and I have learned from mere strangers. I have seen people succeed in their goals. I have seen people fail in their goals. Failing doesn’t mean that you can’t try again. I believe we learn from our mistakes or if you possibly can, learn from others before you commit the same mistake. Well, I have come to a great conclusion. Professionalism plays a major, a very important role in succeeding in life despite of what goal you are trying to reach. To become a doctor there comes a need for a great amount of professionalism. To become a stockbroker, there is a need for people with nothing but a great mind and professionalism. Even to become a professional football player, despite of the great skills you may have to catch a 60 yard pass for a touchdown, there is still a great amount of professionalism expected from that professional wide receiver. Professionalism comes in many different aspects. The first most important aspect of being professional is the mere first image that you present yourself with. I say professionalism starts with your dress code and hygiene. The first detail you will put out to a person meeting you the first thing is that of how you are dressed. You should be dressed up for the occasion you are presenting yourself for. In an interview for example, a man should be dressed with a dark suit with a plain matching tie and decent shoes, also with his hair groomed. The second most important aspect of being professional is how you present yourself! Yes, you may be well groomed, with a perfect elegant suit but, if you do not have the perfect elegant professional attitude, the attire well, does not mean a thing. Professionalism plays a part in every characteristic of any person. So that being said, when being professional make sure you have the proper aura present. Make sure when you meet that important person that will decide your fate that you have a welcoming smile on your face. Make sure you present enough eye contact that you seem very much interested in what that person is trying to offer you and at the same time, not too much eye contact that it may come across to the other person that you are being maybe too cocky. Greet that person with a firm but not too firm handshake. Make sure that interviewer knows that you are comfortable and also make him or her feel just as comfortable. That is a big plus. Although I emphasized that the first impression you make to anyone will determine to the other person on what level your professionalism is to them. Do not forget that consistency is key to life. Yes, your first impression is big and will have a great impact on anyone. Anyone can have a great impression for one day. Can you do it on a daily basis? Can you maintain your characteristics of professionalism? Can you leave a great impression on people every day? This leads me to my third most important aspect of professionalism. Consistency! Although I put it at third most important does not mean that it is not as important as the first two. They play a role together as one. Consistency is big on every part of your personality, characteristic, and statistically. Are you prepared to be dressed professional at all times despite of whatever affair you may have? Are you willing to dress to the occasion? Are you prepared to have a great attitude and personality at all times, despite of what personal issues you may have? Can you keep that smile on your face and a positive attitude? Are you able to keep your good grades at all times? Are you able to have a 100% attendance? Can you show me 100% effort every day? Yes you have to have a great attitude and be dressed accordingly at all times but, can you do this 99. 9 percent of the time. This is what people look for in a professional. Someone they can rely on. There is one thing people tend to forget when talking about professionalism. Everyone has free personal time to enjoy their lively hood. There is no objecting to that. But do not forget that although you are on your own free personal time that there is not anyone watching you. As a famous musician once said, â€Å"the streets is watching†. There are always eyes on you if you are in a public place. You cannot everyday go to work and display a personality of professionalism, then go out to a club and be the worst most obnoxious person ever. Well you can. But I bet you didn’t see your assistant manager on the other side of that club watching you with astonishment! That one mistake may have cost you your whole chance of becoming the next person to being promoted in that company. That is why I say consistency is key. You cannot be professional in places where you think may only matter. Once you take a career that involves you being professional, you must always display that same amount of professionalism at all times. When you are at work, when you’re out at the park, when you’re at the movies, at a bar, anywhere you go you must be professional at all times. This does not mean you cannot have fun. You can have fun and be professional. Just as long as you present yourself in a respectable fashion. I personally will display all these aspects to my experiences in my future for my externship. I have learned a lot about myself and my experiences. I must admit. Most times I have not lived in a professional manner. I am now seeing things in different light. I am seeking the respect of a different group of people than in my past. I know that with all being said above. Without me living up to my knowledge and words I cannot succeed in my field of study so now it comes to that point that I will have to have a great output in my personality, my dress code, and I have to be consistent at all times. I have not been perfect, and I know no one is but I can only try! So after this report I will sit back and evaluate my little theory in professionalism and understand. I can’t only talk about it. I will be about it!!!!!

The mechanics of pipeline reeling

The mechanics of pipeline reeling An Insight Into The Mechanics Of Pipeline Reeling Abstract : Written here is a paper devoted to the mechanics of pipeline reeling. It contains an initial background into the various techniques used for rigid pipe lay, as well as a brief insight into the vessels used. The mechanics of pipeline reeling is discussed in detail, with the effect of pipeline ovalisation as well as a detailed understanding of the moment/curvature response and D/t ratios being defined. An insight into the material selection stage is given, before introducing one to the Recommend Practice for flaw control, involving Engineering Critical Assessment (ECA) as well as specimen testing. Finally the paper will be rounded off with an insight into future concepts and studies being carried out by the industry. 1. Introduction The aim of this paper is to address the mechanics of the ridged pipe reeling process, as used frequently in the offshore oil and gas industry. The use of pipelines to transfer goods or product is highly proven, having been utilised since the late 20th century where the potential for oil was first realised. The relentless demand for oil meant that the need to look past existing onshore reserves was realised, with experimentation into the offshore environment inevitable. Today, pipelines are considered to be one of the most economical ways to transfer petroleum products such as oil, gas and water, in large quantities and over vast distances both reliably and safely. The steady growth of the oil and gas industry ensures that boundaries are constantly widening regarding pipeline installation, with ever-greater challenges of water depth and location becoming apparent. Pipelines are highly versatile in this respect, aided greatly by the many devised pipe lay methods. The J-lay, S-lay, and reel barge allow installation of rigid pipelines in a vast array of different water depths, at different lengths and speeds. The reeling method of installation differs from the others in that it puts the pipe under reverse plastic strain deformation, resulting in increased potential for enhancing induced defects. This lay technique will receive the majority of report analysis. Reel lay of rigid pipelines is now a well-proven method of installation in the offshore environment. The issue of fracture control due to plastic strain under installation is generally very well understood, indeed to such an extent that it is already well standardised for both actual pipeline design and the treatment of fracture control during plastic deformation. These standards take the form of the DNV RP-F108 and DNV OS-F101 respectively. Whilst fracture itself in todays offshore pipeline installations is now unheard of, ductile tearing does indeed occur, especially in laboratory and finite element testing. There also appears to be no recent published accounts of in-service leaks as a result of fabrication flaws to date. An attempt will be made to analyse and understand these relevant topics through the mechanics of pipe reeling. As a final aspect to the report, an insight into future aspects regarding rigid pipe reeling will be given. As an example, flaw tolerances due to the introduction of new pipeline materials and the ever-increasing exposure to H2S (sour service) environments are known to cause material stress cracking. 2. Pipeline Installation And Field Overview Offshore pipelines come in many different forms, dependant on their location in the field. The further downstream they are located, the larger their potential diameter as more flow streams connect. Pipeline design is dependant on the findings of 3 main stages of design, namely conceptual, preliminary and detail engineering. Within the first stage the concept is evaluated for feasibility and all restraints are identified. Preliminary engineering focuses on the defining of the project parameters and goes into enough detail to order the pipeline. The final detail engineering breaks everything down to the finest detail for submitting as work tender to the client. Improved welding techniques, survey capabilities, anchor handling techniques and procedures have all helped contribute towards more fast and efficient installations. The main loading considerations during pipeline installation are hydrostatic pressure, tension and bending. Three main lay methods exist for the installation of offshore pipelines. These are the J-lay and S-lay methods, as well as the technique of reeling. S-lay/Steep S-Lay The S-lay pipelay configuration offers the ability to install pipeline in typically shallow to intermediate water depths. It gets its name from the ‘S shape, formed from the overbend at the vessel stinger to the sagbend before contact with the ocean floor. This can be seen in the following Figure 1. S-lay of pipeline involves a normal or semi submersible vessel with an attached stinger. The stinger, used to minimise curvature and thus bending stress, supports the pipe as it is being offloaded, housing rollers to allow smooth movement of the pipe as it moves off. Tension is typically provided in the form of track loop deck tensioners, and varies depending on waterdepth, submerged pipeline weight, departure angle and sagbend and overbend curvatures respectively. A ‘firing line is installed on the vessel, containing the welding stations and relevant inspection stages for pipeline assembly. S-Lay is ultimately limited in deeper waters due to tension capacity and thus high overbend strains. As water depth increases the stinger length required becomes unfeasible, with more buoyancy being required to support the longer pipe length for the steeper lift off angle. J-lay The J-lay configuration allows for the installation of rigid pipeline in water depths of over 500ft. The term ‘J comes from the shape the pipeline takes up during the lay, as seen in Figure 2, below. The J-lay method works via the use of a barge with an installed tower, used to provide the required vertical drop and lower the product. Due to its configuration, the J-lay method requires no stinger and thus overbend stresses are eliminated and lay tension is reduced. The setup typically suffers from slower productivity than a comparable S-lay due to the vertical setup on the vessel. This can often result in the method being more cost prohibitive. It is however easier to utilise smaller vessels such as smaller barges and support vessels due to the relatively compact tower arrangement. Improved motion characteristics of the majority of J-lay vessels also results in lower dynamic pipe stresses. Reeling Reeling of pipeline is a configuration often utilised for offshore pipelines as well as catenary risers. It differs from the previous two installation methods in that the pipeline itself is first welded together and insulated as required, before being spooled onto a large drum on a reel lay vessel, all onshore. Upon loading the pipeline onto the reel, plastic strain deformation occurs. Once the lay vessel is in location, the pipe is then unreeled and straightened using a straight ramp, before being layed via either of the above J-lay and S-lay methods, typically dependant on conditions such as water depth and vessel configuration, namely horizontal or vertical reel. Throughout the lay, the pipe is tensioned and anchored to prevent sagging. Once complete a pullhead is attached to the tail end, before an abandonment cable guides it to the seabed, with an attached buoy used as a location marker. Reeling can typically be used for pipe diameters of up to 16†, as well as for pipe-in-pipe installations. As the pipeline is not being created during the lay, reeling offers the advantages of short installation times which can be particularly advantageous in short weather windows. Reeling of pipelines also tends to be more cost effective for this reason, offering the potential for better safety as well as a better quality product as a whole, that can be fabricated from exotic steels, coatings and internal liners as required. Weld joints can suffer from fewer flaws due to enhanced onshore inspection, often from Non Destructive Testing (NDT) via X-ray methods before the pipeline is reeled. A possible downside to the reel lay method is that the pipe radius tends to restrict the length of pipe layed, typically around 3 to 15km. Because of this, if the pipeline is made up of multiple segment lengths, connecting the set can prove challenging after their initial lay, and multiple segments being layed many miles offshore can result in undesired transit time. The pipeline also comes under plastic strain deformation, potentially resulting in ovalisation of the pipeline as well as affecting maintenance and monitoring of the product. Buckling can also occur, being time consuming to correct and due to the occurring deformation throughout the reel lay process, traditional coatings such as concrete cannot be used. Reeling Ships/Barges Typically, reel lay vessels often take the form of barges, as well as modified drillships and bulk carriers. Purpose built vessels also exist, examples being the 1978 CSO Apache pipelay vessel, seen below in Figure 3. Depending on the vessel configuration, reeling can be horizontal or vertical. Horizontal reeling is typically used with the S-lay configuration, with the vertical setup used mostly with J-lay. The CSO Apache vessel however, is an exception to this rule, being a vertical setup for use with S-lay. 3. Mechanics Of Pipe Reeling The pipe reeling method produces high levels of bending strain on the product, often just slightly below pipe shell buckling strain values. The primary concern is that because of this reverse plastic strain from reeling on and off, the pipeline is being ‘degraded, being downgraded below that of conventional J-lay and S-lay an so producing a greater failure risk. This, along with the aligning and straightening processes required, modifies the pipe material properties resulting in uncertainty to its performance. Pipe reeling also produces uncertainty with regards to burst, collapse, and fracture of the pipeline. Collapse in particular is directly linked with pipeline ovality, a result of the installation process. Despite all this it is fairly obvious that if plastic reeling strains were such a concern then we wouldnt be installing flowlines with them! The reality is that there is no reduction in performance provided that certain items are carefully considered during the design, procurement and fabrication processes. As an example, poor understanding can result in a greater pipe wall thicknesses, but with the reeling method now extremely well understood, to such an extent that there are detailed standards for it, there are nearly always relevant procedures to follow. Pipeline Ovalisation The method of rigid pipe reeling is such that the inducing of ovalisation to the pipe is inevitable. Ovalisation is the deformation of the pipe from a near perfect circle to an elliptical cross section due to plastic strain deformation. The challenge with such an installation method is maintaining an ovality that is within acceptable limits during the pipe lay. Ovalisation can be increased with bending and external overpressure and also decreased with bending and internal overpressure. It is a non-linear effect that greatly increases as the material reaches its elastic range. Ovality is strongly influenced by material properties such as rate of strain hardening, as well as the pipe diameter over thickness ratio, D/t and the reeling geometry configuration. Also of particular concern, is the relationship that a variation in material properties between pipes can bring, mostly over the required welded connections. The concept of ovalisation is not concerned with the materials yield stress itself but depends on the material yield anisotropy, that is the ratio of yield stress in the hoop to the axial direction. In order to ensure that the pipe does not collapse during installation, it is important to ensure ovality is kept within set parameters, as defined in the DNV-OS-F101 Offshore Standards. This is based around the characteristic resistance for external pressure collapse, pc and can be seen below in Equation 3.1. afab is the pipe material fabrication factor and is used for manufacturing processes that introduce cold deformations, giving different strength in compression and tension. The maximum value this can represent is a value of 1 for a seamless manufacturing process. This reduces to as low as 0.85 depending on the fabrication method used, for example the UOE bending, forming and welding process. The ovality value, fo is outputted as a percentage and from the DNV standards is not to exceed 3% in a reeling application. It is critical in the selection of wall thickness during design stages and must be of large enough value to take into account not only the expected ovality but localised peaks. Too large a fo value will result in a pipeline being of thicker wall thickness than required. When a pipe is bent plastically to a positive curvature (i.e. when spooling) and back again (coming off the reel), most ovalisation is recovered when the pipe is straightened. If too high an amount of ovalisation is still present however, then external forces in the form of rollers can encourage straightening, though this itself can be disadvantageous due to the potential to damage any linepipe coating. Ovalisation is disadvantageous for certain tasks that will be carried out throughout the pipelines lifespan, such as pigging and through flow line (TFL) tools. Pigging, a form of linepipe maintenance for cleaning and inspection, can be carried out without halting product flow by using the pressure of the flow to carry the pig from its launcher to its receiver. However as they are designed to fit snugly in a round pipe, excessive ovalisation would cause potential blockage or incompatibility. Moment Curvature Another aspect for consideration in order to gain a further in-depth understanding of the reel lay process is the relationship between moment and curvature during pipeline installation. The moment/curvature relationship is based round that of the pipes physical geometry, as well as the relationship of stress and strain in the material. An example of a moment/curvature diagram can be seen below in Figure 4. The pipeline is initially spooled onto the reel resulting in plastic deformation, and thus is taken past the material yield point (A) to the extent that the maximum installation curvature (B) is experienced by the pipe. This curvature will be dependant on the radius of the reel being utilised, with the radius increasing as pipe is overlapped. From its reeled state, the pipeline is transported to the lay destination for unspooling. It is unreeled to the pipeline aligner, a stage that due to the pipeline weight and applied back tension from the reel, results in reverse plastic deformation (C). With the pipe now resting between these two points, it sits visually straight in its span. Passing the pipe through the aligner of radius (E) and towards the straightener, bends it in the same direction to that is was initially spooled. The 3-point straightener itself exerts a further reverse plastic bend (F) on the pipe. Taking it slightly past its initial curvature results in it sitting physically straight on the seabed when all tension upon it is relaxed. The delivery state to the seabed location will correspond to the relevant standards as denoted in DNV-OS-F101. It is generally considered that the maximum moment to be sustained by the pipe during reeling will be around that of (B), with this moment being less than the plastic moment. This is due to the fact that at this point the bending behaviour of the pipe is stable and so buckle is unlikely to occur, with moment still increasing with curvature. The plastic moment at any point of the pipeline is a function of the pipes diameter, wall thickness and yield strength respectively, with the post yield strain hardening as well as the section ovalisation also playing a less extreme factor. One issue that tends to arise with pipeline reeling regarding moment and curvature occurs with the use of different pipe grades during production. When pipe is requested by a supplier, it is done so by grade. The supplier will create batches of pipe to the specified specification, but due to manufacture no two batches will be exactly alike i.e. some pipe will be weaker than others and vice versa. Despite all batches of pipe adhering to a minimum specification, the mismatched material specifications each react slightly differently during reeling, potentially resulting in high local curvatures and in extreme cases, local buckling. In the case of a pipeline being reeled, the moment required to spool a pipe onto the provided reel is provided by that of the following 12m section in line. Should this pipe be of weaker grade than the initial one, the potential that the moment will not be sufficiently supported arises, resulting in a localised increase in curvature, producing the greater pot ential for local buckling. D/t Ratio The pipe diameter over thickness ratio (D/t) is of high importance in pipe selection, being directly related to that of buckling. Typically, as the D/t ratio decreases the pipe can withstand a higher strain before buckling. However this comes at the expense of a large increase in ovality to the extent that it may go over desired limits, affecting such procedures as pigging of the pipeline. This can be seen below in Figure 5. Figure 5: Plot of Allowable Strain and Ovalisation at Allowable Strain As a further example to the relation to the D/t ratio to ovalisation, research carried out on pipe of API steel grade X65 gave the following results, as found in the following Table 1. Material Selection Material selection for pipelines is highly important for several different factors, and can determine the standards to follow and installation procedure. For a carbon steel for example, the requirements for a reeled pipeline are not that far removed from the requirements of national standards, but for other materials such as high strength pipe grades, careful review may be required. All materials require a certain level of constraints to be effective, with control typically needed on factors such as tensile ranges, maximum diameter to thickness ratio (D/t) and inner diameter (ID) tolerances. By working with suppliers who understand the installation process, a the chance of a suitable product is greatly increased. DNV standards dictate several basic requirements for pipe reeling. A maximum yield strength value of no greater than +100MPa of the Specified Minimum Yield Strength (SMYS) is to be used, with a yield spread no greater than 100MPa. Wall thickness tolerance is considered to be dependant on the pipes actual wall thickness and a yield to tensile ratio of no greater than 0.90 is to be used. Strain aged testing of parent pipe material must also be carried out to the expected levels experienced during the reeling process. For the reeling of rigid pipeline, the choice of pipe material is strongly influenced by the manufacture method, both in terms of properties and geometry. Two main manufacturing methods exist, being submerged arc welded (SAW) and seamless (SMLS). SAW pipe is created by rolling a plate and welding the seam. It is a closely controlled method of fabrication offering tighter dimensional tolerances and better availability than seamless pipe. Seamless pipe involves the driving of a billet over a piercing rod, creating a hollow shell. This method typically offers better availability than welded pipe, at the expense of poorer tolerances in properties, in particular geometrically. Technip made an attempt to explore the variation of wall thickness in four 10km length pipelines of 6†, 10† and two 12† diameters, with stated wall thickness from 12.7 to 21.3mm. Measurements were taken at various points of each pipeline through their circumference, building up a broad cumulative distribution function for the thickness of each pipe. It was found that there was large variation in the wall thickness values throughout each pipe. Despite initial concerns, it was said to be almost impossible for a large to thin extreme of wall thickness to occur at a weld connection, due to the large variation of possible thicknesses in each pipe. It was concluded that the plastic moment capacity of seamless pipe was dominated primarily by the variation in average wall thickness through a pipes cross section. A highly exaggerated illustration of the deviance of each outside diameter (OD) for each type of pipe manufacture can be seen in the following Figure 6. The variation in OD of any pipe is closely related to ovality of the linepipe and can be obtained from additional analysis. An additional issue that tends to arise with pipeline reeling, regarding material selection, occurs with the use of different pipe grades during production. When pipe is requested by a supplier, it is done so by grade. When a grade is selected as being suitable for use, a supplier will ensure that the material supplied exceeds the grade, often level with the next grade up, in order to prevent rejection of the pipe due to it being under specification, which could cost them vast amounts of money. This results in welding issues as higher grade materials are more difficult to weld to standard, requiring overmatching (where the weld is stronger than the pipe itself) with the surrounding material. In order to prevent this, companies have been known for requesting material in the form of a YS/UTS ratio, yield strength over ultimate tensile strength, described in more detail below, keeping tighter control on what is produced. This comes at a disadvantage to suppliers due to the finer toleran ces involved. Reeling can also cause unacceptable strain hardening in certain materials, as well as large work hardening in higher grade steels. Strain hardening can be described as the increase in material resistance after previously exceeding its yield point from plastic strain. In ratio form it is YS/UTS, with lower ratio values indicating a greater material resistance after yield, and thus greater material stability under plastic deformation. A typical graph of strain hardening in a material can be seen below in Figure 7. The increase in material resistance can be seen from the positive slope produced. Work hardening, the increase in yield from repetitive straining is also of concern, but happens in fewer materials. Corrosion is an issue for pipelines in such areas as sour service. In areas such as hydrocarbon production pipelines, an inner liner, often of high-density polyethurene, is inserted as a form of corrosion prevention. This greatly enhances the life of the pipeline but issues have arisen with such a setup, including liner collapse. Liner collapse can occur when gas that is travelling through the liner becomes trapped between it and the outer pipe. During service this has little effect due to the pipeline operating pressure, but when the pipeline is depressurised, it can expand and collapse the liner. It has been shown that certain materials can experience increased resistance to fracture due to a growth in micro cavities and other such defects that can initiate ductile crack propagation. Due to the nature of the reeling method for pipeline installation this effect is given less attention however, instead aiming to reduce the chance of fracture via carefully selected material grade. This is due to the fact that reeling produces much smaller plastic strain levels than is ideal for the theory to work to great effect. Plastic Strain Effects On Materials And Welding The majority of load carrying structures in an engineering environment have cracks present in their construction, through either the linepipe material itself or the welding that was carried out through construction. It is more or less unheard of to have a pipeline with no defects at all, and it would be highly uneconomic to repair every flaw found. As such it is important to develop an acceptance criteria in order to establish defects that are acceptable and those that are not and have the potential to cause failure one that states a guaranteed fitness for purpose and integrity of the pipeline. Considering the two possible lay methods in terms of strain, that is plastic strain and elastic strain installation respectively, each has different assessment criteria to carry out. The standard procedures for elastic loading are not equal to plastic loading, being modified to suit. The severity of a flaw is dependant mostly on its size, location, loading and the material properties. As an example, installation methods involving significant plastic strain normally require high toughness materials in order to allow acceptance of realistic flaw sizes in the girth welds. An acceptance criteria must be carefully considered to ensure that it is not over cautious. It must be ensured that no unnecessary work is carried out with regards to weld repair, inspection and pre-weld treatments, and that no weld methods, materials or design are wrongly disqualified throughout the process. The industry as a whole accepts that flaws in structures are acceptable as long as they are accounted for and cannot cause failure. Modern pipeline design is based on a limit state design, with each failure mode designed for independently. One of the main failure modes in rigid pipelines for reeling is the fracture of girth welds. For girth welds, it is important to ensure that the strength and fracture toughness are well optimised, as this will help to prevent any present flaws from extending and thus affecting the overall pipeline integrity. It needs to be demonstrated that the pipeline has adequate resistance against crack extension by tearing and unstable fracture during its installation, as well as operation. This is done via an Engineering Critical Assessment (ECA), which was devised in order to help determine acceptable flaw sizes in girth welds. Recommended Practice For Flaw Control The standards by the DNV give a Recommended Practice to be used for cyclic plastic deformation as found in rigid pipe reeling. The Practice is made up of 3 key elements, namely a procedure for fracture resistance testing, an Engineering Critical Assessment (ECA) procedure and finally a validation testing procedure. Each of the three stages is expanded on below. The purpose of the initial element of the procedure is to characterise the pipe materials fracture resistance as well as the fracture resistance of the girth welds. This is done to help determine acceptable flaw sizes in the pipeline. There are two ways of carrying out such analysis according to the utilised BSI BS 7448, namely via the use of either a SENT (Single Edged Notched Tension) or a SENB (Single Edged Notched Bend) specimens. Due to the loading characteristics of reeling, the SENT specimen is the most frequently utilised, as it is considered to be the more representative of the two with regards to the crack tip constraint of girth weld flaws. Use of the SENB specimen results in conservative results. With regards to cyclic loading effects regarding fracture resistance, research carried out by both TWI and DNV has shown, through both small and large scale testing, that cyclic loading does little to affect the fracture resistance of both the pipe material and its welds. Due to this, the DNV standards recommend that the fracture resistance values are determined for later ECA analysis through the use of one-directional monotonic testing of the SENT specimens, before later being verified by small scale testing of Segment specimens, used to resemble conditions of a girth weld during linepipe installation. Characterise The Pipe Materials Fracture Resistance To begin with, monotonic testing of the SENT specimens was carried out, in order to characterise the materials fracture resistance values by J-R (or CTOD-R) curves. For this application the BS 7448 standard is followed, with exception to the use of the SENT specimen in order to account for obtaining a loading mode and thus crack tip constraint similar to that of a pipe circumferential surface or embedded flaw. No set standard is currently available for this configuration of SENT testing. The typical SENT specimen, as seen above in Figure 8, is of recommended dimensions B = 2W and contains a surface notch that is used to represent the relevant orientation for defects in girth welds. The aim of this testing stage is to evaluate results for all possible defect locations on a reeled rigid pipeline. The sample is to be either clamped in position or pin loaded for testing, with both methods being deemed acceptable for comparison of flaws in pipe girth welds. A minimum of 6 specimens will be tested, with each loaded to a tearing length of anything from 0.2mm to 3mm, in order to obtain an accurate J-R or CTOD-R curve. It must be ensured that no brittle fracture occurs before attainment of the expected maximum load value, or that of a stable crack extension of at least 1.5 mm, for the results to be effective. Testing is done at the lowest predicted install temperature the pipeline will foresee, with consideration also made for install temperatures of over 50 °c due to the p ossibility of a reduced stable crack tearing resistance. The J-integral is obtained from the relationship where Je represents the elastic area of the J-integral and Jp the plastic respectively. Perform An Engineering Criticality Assessment (ECA) The second stage of the procedure is based around an ECA assessment. An ECA assessment is used in order to help determine acceptable flaw sizes that will not cause failure during linepipe installation and later operation. It can be broken down into 3 basic stages, those being material properties, flaw data and material stresses. Having any two of the three available allows the third to be found, but the most common method utilised is establishing the maximum tolerable flaw size from material properties and applied stress information. In 2007, the DNV-OS-F101 standards had an Appendix A added, based on the BSI BS 7910 standards, in an attempt to clarify all existing information relating to ECA calculations. The previously found fracture properties, established from testing of SENT specimens, are used to ensure that no weld flaws will cause failure during installation. Failure itself is defined as a preset crack extension and final crack size being exceeded, as well as the occurrence of plastic collapse and unstable fracture. The crack size definitions are mostly recommended for study in the installation phase, giving desirable information on flaw size after installation, that itself being during the pipeline operation. The ECA assessment itself is described in the BSI BS 7910 level 3 tearing instability analysis, but for the purpose of pipe reeling is modified to suit. The method is fairly in-depth, but a summery will be given to illustrate what is involved. The initial requirement is to adjust the found stress/strain and curve data from the SENT in order to help create a Failure Assessment Diagram (FAD), used to help distinguish between acceptable results and those that would cause possible failure. This is done by plotting both brittle fracture Kr against plastic collapse Lr. A cutoff value for plastic deformation must be found, as the FAD cannot account for arbitrary large plastic deformations. An example FAD diagram can be seen below in Figure 9. Figure 9: Failure Assessment Diagram (FAD) It is also required to calculate the actual stress and strain concentration of the pipeline. The act